Hi,

Does anyone know how to replace the element in my Diplomat ADP5330 fan oven? do i replace it from the inside? or from the rear?

Also i seem unable to locate the element for my model of oven

All help will be greatly appreciated.

Regards

Dom

Dom, January 2007

dom , did you ever do it? i need to replace my element now,
and im wondering through the back or front?? as the grill element seems to be attached

Tony Shipp, February 2021

e spares are very good for oven spares and show a video on how to replace the fan and motor

Chris, November 2014

Hi Lee,

Just another question regarding my oven, it is a range oven, when i tried to take out the back plate, there was 2 screws at the back, the problem is is the grill element goes through the back plate and looks as if it fasten to this on the rear of the back plate, also the back plate looks as though it is one unit with the side plates??, dose this mean i may have to get to the fan elemant through the back of the oven?
Any help greatly appreciated.

Dom, May 2007

Thanks for that Lee, will give it a go later

Dom, January 2007

Hi Dom,

From inside the oven remove the rear plate - normally 2 - 6 screws. This will reveal the element and fan blades. To remove the element just undo the screws holding it in place and carefully ease the element out.

There isn't much information on your model, however, you should be able to match it up from the pictures on our site here:

http://www.ukapplianceparts.com/elements.asp?search_fd0=Fan%20Oven%20Element&search_fd3=diplomat&multisearch_fd3=5

Copy and paste in to your browser.

Lee, January 2007