If your mower is like mine, try this: unscrew the forward/reverse gear knob. take out the two screws that hold the gear selector cover plate and carefully rotate it to the right out of the way. lift the seat forward. carefully remove the battery and the holding tray that its setting on. The Rear trans belt is now visible. with your right hand, grab the smaller pulley and rotate it to the right which will releave the tension on the belt. While holding this pulley far to the right, take your left hand and remove the belt. Make careful note as to its path of travel. Instal the new belt and release the tensioning pulley back into place. Replace the battery holding tray and battery. Fold the seat back down into position. Repalce the gear selector cover plate. Put the knob back on. Your done.
clyde, June 2009
