After about three cycles the base of the dishwasher is full of water and trips off a micro switch to prevent further ingress; this then trips the house MCB! I tip the machine backwards and empty out the water and all is ok until about three more loads, well you get the idea,so please HELP!
Indesit D610, three years old

Roger, May 2004

It may be that the tubes that lead to the water level sensors are clogged. Find them in the bottom of the dishwasher, take apart and clean.

Hot washes will help to keep them clear if you manage it.

John J Gray, June 2004

First check that the machine is level it has adjustable feet on the base. Check that the bottom spray arm mounting on the floor of the machine is screwed tight on the base. If all of these are OK then its probally a leaking Washpump.

E Lambert, May 2004