David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

My Snapper S31S weedeater starts,revs up but quits?

When I push the primer button fuel spirts out the of weep hole on the carburator. The weedeater only runs as long as the fuel port has gas in it I guess. I choke it ,Prime it and try to start it. It fires up but dies in fifteen seconds or so. I pushed the primer and felt pressure release on it. I notice now when I push the primer fuel spirts out of the weep hole in the carb. What do you think this means? Did I ruin the carb or did I just flood it?
wesley burnett, March 2007
Just take the carb off dude....I had the prob.... f'ed with it for hours and finally just took the carb apart used carb cleaner ...even take the jets out and clean...then reassemble. tight'n carb screws snug...rotate out 1 and 1/4 turns and try restarting...you need two people one to hold it and pull and one to adjust the carb....note you may need to spray carb cleaner in the chamber while cranking to get the fuel priming early..

Fraz, March 2009
link Click here to see other fixes for Snapper.