David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

The ignition on my cannon chichester keeps igniting when ovens are used?

When the upper and lower ovens are used on my cannon chichester oven the automatic ignition ignites repeatedly after a minute or two. What is the problem? After a while it makes cooking unbearable!
chris cooker problem, February 2005
To remove the front panel with the knobs on, you have to remove the two side panels first. Then the curved aluminium edge trims which are held to the long side trims come apart by removing one screw.
Constant sparking was due to the two brass connectors in the microswitch attached to the oven taps coming out of their seatings and permanently touching. The microswitch is in two halfs.

GaryC, February 2007
Bob, If you're still looking at this forum:

a) Is that the earthing at the cooker end (i.e. not the plug)?

b) Do you know how to remove the control panel? - I took off all the knobs and retaining screws but couldn't release the trim bar along the top, it looks like it might just snap out but as it's not my cooker I was reluctant to force it.

Howard, January 2007
Check the earth.

bob, November 2006
Don't know if you found out what it was, but if you did, can you let me know please?

steve, October 2005
link Click here to see other fixes for Cannon.