home Fix label Household Appliances label_important Washing Machines category Zanussi

my zanussi washing machine is not going into rinse or spin?

water loads when first turned on and washes but then stops no rinse or spin

angie, June 2004

home Fix label Household Appliances label_important Washing Machines category Zanussidone

Switch off, unplug, take top off and look at circuitboard on top of wash program selector dial. Check the circuitboard printed wiring, sometimes gives up ghost. Broken printed circuit connection can be soldered with great care....

paitty, September 2004

Check your wastage pipe and make sure its not blocked

C#, June 2004

You have a blocked filter or drain most likely

LesW, June 2004

link Click here to see other fixes for Zanussi.

Fix Fault - Household Appliances

home label Household Appliances label_important Washing Machines

Fix Fault - Household Appliances

home label Household Appliances label_important Washing Machines

fixfault.com for free repair help, information and advice.

How can I fix my Miele W504?

How can I fix my Miele WT945?

How can I fix my Bosch Maxx 6?

How can I fix my Hotpoint WF840G?

How can I fix my LG WD 8050F?

home Fix label Household Appliances label_important Washing Machines category Zanussi

my zanussi washing machine is not going into rinse or spin?

I can answer this question...

my zanussi washing machine is not going into rinse or spin?

I can answer this question ...

my zanussi washing machine is not going into rinse or spin?

Washing programme stops after 3 minutes?

Simpson enduro 751?

How to fit new seal on hoover washer/dryer?

Hoover 5030D dryer?

John Lewis 1400 washing machine?

Repair or replace washing machine?

How do I mend my samsung washing machine?

How do you remove the control panel of a Simpson Enduro 751?