David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Click here to ask your question

Replacing triton opal?

my 9.5kw triton opal - starts hot then after few moments goes cold - pressure fine - restarts hot when turned off and on again - probably need to replace as i suspect thermostat gone - ? what models have same size plumbing requirements to purchase new shower ??
Amanda, August 2007
dvd no good asking you then

sonray heating, August 2007
Or just get a DECENT plumber round ?

dvd, August 2007
best way to check that is to remove your shower headand tur your shower to hot - it should be a dribble
then turn to cold - it should be fast.

if not and the hot setting is the same as the cold both running fast then your flow stabilizer is faulty.


if your fitting a new shower try to stick with triton then you know the cable and water feed are on the right.

hi-spec plumbing, August 2007
link Click here to see other fixes for Triton.