Was using oven when my sockets circuit tripped, when i switched electricity back on the fan turns normally, the timer seems ok, but the oven doesn't heat up. Maybe the element broke and this tripped the circuit.
Is it easy/costly to replace?
Thanks

Andy, August 2007

Taken out old element. Replaced new. Exact same size but now the fan doesn't go around. Help ! Please

Add, October 2013

There is no need to remove the cooker from its housing as the element can be removed easily with the cooker in place
1)
Isolate the Mains supply to the cooker.
2)
Remove the four self tapping screws holding the Fan housing cover in place.
3)
Remove the two self tapping screws holding the element in place.
4)
Carefully pull the element towards the front of the cooker to expose the two electrical spade connectors.
5)
Carefully pull off the electrical wire spade connectors.
6)
Refit the new element in the reverse order.

Bazzle49, August 2007