4 hours ago Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Click here to ask your question

easiest way to fit an outside tap?

easiest way to fit an outside tap using pushfit please.
alan, September 2007
Find nearest cold water pipe to point where outside tap is required, preferably kitchen side, use self tapping fitting to cut into pipe with small turn off tap so water can be turned off from inside during winter,attach flexi pipe , asuming you have drilled a hole the size of the pipe through the wall use push fittings to outside tap, make sure there is a slope from where you have tapped into the inside tap so that when tap on inside is turned off you can drain any excess water out of the pipe during the winter months so it does not freeze, hope this has helped

olga barnes, September 2007
what do you want to know ?

pushfit fittings just push together and cut you pipe to the size you want.

hi-spec plumbing, September 2007