When I set the machine to do the zig-zag stitch, it continues to sew in a straight line.
Also, the needle bar will not stay centered, it's too far to the left. The adjusting screw located to the right of the needle bar will only move it a small amount, and then starts back in the other direction. It appears to be an eccentric.
I can't find a way to adjust the connecting rod as it is in the middle of the machine and not easily accessable.
Any help will be greatly appreciated.

Patricia Murdock, September 2007

Hello Patricia,
First of all take the top off the machine and look at the nylon camstack with all the pattern cams on, see if the camstack is split all the way down, you will soon see, get back to me on drivewithken@blueyonder.co.uk when you can and let me know.
Ken

drivewithken@blueyonder.co.uk, September 2007