Miele T5206 Semi commercial dryer not heating?

Hi I've got a T5206 and it wont heat up - everything else works fine. i've cleaned out the exhaust and defluffed the heater and checked all the connections. I've found out that there is a service pro ... more

done

my miele tumble drier novotronic t490 will not start?

I went to use my miele novotronic T490 drier and it did not start. The last time it was used it worked correctly to the finish of its programme. There is power to it, the anti crease finish light is o ... more

How can I fix my miele tumble dryer?

Miele Novotronic T294C tumble dryer is not heating up. Have watched video explaining how to reset button, but can't find button! Help!

Miele T238C condensate pump removal?

Can some kind soul (or Miele guru Peccavi if he happens to read this) tell me how to remove the condensate pump on a Miele T238C dryer via the rear access cover? The pump is either clogged or defectiv ... more

Miele T233C: how to change door locking mechanism?

Problem: switch on power; green light flashes then goes off, dryer won't start WEB recommendations: change door locking mechanism Question: * who's done this? * what do I need to be aware of? * ... more

No heat from my Miele T4262C?

I have a Miele T4262C which has been trouble free but yesterday failed to dry clothes and doesn't heat up. Everything else works fine and I'm thinking of calling out an engineer to look at the problem ... more

how can Iclose the door of tumble dryer?

After drying session the door0f my miele novotronic T 650 C tumble dryer is not closing

How to open a Miele T495C condensation dryer?

Our dryer is leaking steam and does not produce any condensate. I would like to check the steam hose and the water pump, but can not for the life of me figure out how to get into the dryer.

Can I fix my Miele tumble drier that has stopped reversing?

My Miele tumble drier no longer does reverse action, just goes in the one direction. Is this something I can repair?

done

Miele dryer (T 4223) - remove front plastic panel?

I have a miele t 4223 dryer (6/7 years old), and I need to change the heating element. My problem is that I cannot find out how to remove the upper front plastic panel so I can get to the thermostat c ... more

How can I fix my miele dryer model t454?

when my miele tumble dryer model t454 turns one way no problem whrn it reverses it makes a growling noise but still comples the full cycle

How can I fix my Miele Professional T5206 ?

My Miele Professional T5206 catch has gone. Is it easy to buy and fit one?

My Miele t4222 only blows cold air?

My Miele t4222 only blows cold air. All the filters are clean. How do I fix it?

done

Miele Novotronic T430 tumble dryer no hot air?

My Miele Novotronic T430 is not producing any hot air. Please can you advise.

done

Miele T7644?

My miele condenser dryer the water is not ging into the water unit not sure whats going on as I have cleaned all filters etc but the water is not on the floor either well not yet NEVER owned a Miele b ... more

done

is it serious?

miele novotronic T495C, makes a constant whirring noise when in use, today I re checked the condenser because washing was coming out damp after an extra dry operation. the condenser was full of water, ... more

done

how do i clean out airways on my miele novotronic t495c tumble dryer?

the red clean out tumble dryer airways pc light comes on be for drying cycle has done,how do i clean out airways and where are they

done

how can i fit a new dryer belt to a miele professional pt7136?

hi i would like to know how to fit a miele professional pt7136 tumble dryer belt please.

How can I fix the sensor of my Miele T 230 C condenser dryer ?

Dryer takes ages drying clothes - engineer says sensor has gone and was unable to fix this as they didn't know how to repair the circuit board

What is the problem with my Miele T4222 tumbledryer?

The condensed water struggles to be pumped out. The tube has been cleaned. The machine has to be turned off and on again a few times before it will begin to tumble again. The light showing 'empty out ... more

done