How do I fix the alarm on my wall clock?

I have a 31 day clock. My clock will not strike the correct number of chimes for the hour. How do I adjust the chimes so that they strike the correct number of times at the correct hour. We inherited ... more

done

Weights on my grandfather clock?

Our clock was shipped lately, I was wondering about the weights, I know the weight in the middle reaches the bottom first, but the one on the left side seems to be higher than the one on the right sid ... more

done

how to get waltham regulator clock to chime?

how to open the waltham clock to repair chime problem inside cannot reach from door openings back does not come off?

done

how can I fix my Seiko chiming wall clock?

Seiko Quartz Westminster-Whittington Ref. QQX216B Cal. 12104 Japan This is my mother's clock. It was chiming 4 times per hour, but it was 4/8 hours off, so I stopped it when it rang 9 at 1 a.m ... more

done

How to dismantle, clean, old wall clock mechanism?

Altho I know where to get a replacement clockworks (Timesavers.com), for the sake of tinkering/learning experience, I wish to dismantle an original (1900's) Regulator mechanism, and asess its potentia ... more

done

How To Fix a Ships Bell Clock (8 Bells)?

Clock started running slow but the speed adjustment is all the to the + side.

done

how can i fix my cuckoo clock?

The chains from my cuckoo clock have come out. Does anybody know how i can put them back ?

done

How to start my grandfather clock?

We have never had our grandfather clock cleaned or oiled in 15 years. It is harder to start each time I accedentally let it run down. This time it stopped without running down. I think it is OK but ... more

done

German cuckoo clock?

We have a German cuckoo clock. My brother got it in Bavaria. It has no name on it. When it is wound up by pulling the weight up, it does not work or keep time. What can I do to fix it. I am fairl ... more

done

how can I fix my seiko chime and strike clock?

The wall clock has a battery but the handles showing the time do not move. The pendulum moves back and forth but the clock handles remain still.

done

When I wind the clock the chime continues to ring?

I have a Waltham wall clock. It is a 3l day clock that chimes. Recently when I wound the clock the chimes would not stop ringing. It continues to chime while I am winding it. It seems like the ther ... more

done

What voltage is required for solenoid on ITR master clock mod.13?

What votage is required for the winding solenoid of my International Time Recording Co. mod. 13 - 7 self winding master clock. It was made in London in the 30's. Models manufactured in the USA run on ... more

done

pendulum stops swinging after I rewind the clock?

the clock was stopped and i rewound as usual, started the pendulum but it slows and stops swinging

done

How can I make the alarm sound?

My alarm clock's radio will not play and the alarm will not sound, how do i fix it? The make and model is Matsui CR503.

done

old school clock circa1900,wooden?

erratic running stops after a short time cleaned about 5 years ago ok initially.

done

How can I fix an old mantle clock?

This is a turn o the century mantle clock that works but the hour chime is about 4 hours off. There is a small stem at the top of the clock that turns with the end of the key. Is that an adjustment f ... more

done

Grandfather clock?

The clock stopped ticking.I forgot how to attach the pendulam after I removed it. I need to see a picture of that area.

done

cuckoo clock?

Can anyone show me a diagram of the cuckoo mechenism a cuckoo clock please as mine is brocken.

done

stop big hand from hitting other hands?

i just brought a penjulum and the big hand hits the other hands when its at 12 0 clock

done

Old Mantle Clock, uneven tick, stops?

I have an old matle clock - used to go fine with wedge under one end. Now won't even with wedge. Uneven pendulum swing is problem - can I adjust pendulum arm? How? Thank you in anticipation

done