How can I fix a pull cord light when the pull cord won't oull anymore?

Our pull cord light stopped working. When you pull the cord, it doesn't do anything. I thought it was tangled but that is not the case. Can it be fixed? It's a basic white base with a metal cage ar ... more

Halogen spot lights don't always work?

Hi hopefully someone can help me with this issue! My kitchen lights when switched on will sometimes work no problem but other times you switch on and nothing happens you can hear the buzz of electric ... more

done

plastic brcket around the fitting of the bulb?

message to service manager in Uk; i had problems with flickering like many others. After dismantling the head the plastic bracket ( due to heat)proved to be broken and now I cannot mount the plastic ... more

done

Need replacement part;reset button ?

KAOYI KFD 515S; floor lamp on/off switch. Need to replace reset button for floor on/off mechanism. It has two functions, slide switch for one lite and reset button that works second lite feature. The ... more

Loose Tizio head?

My newish Tizio's head is loose and does not hold its position. Since it is attached with rivets that the power flows through, I am wondering how it can be tightened up.

Need globes for KFT 10522 floor light?

Looking for globes for 5 arm KFT 10522 Standard floor light

done

Threading wire?

I'm building a lamp table and want to use a swing arm to the lamp socket. The swing arm has 2 five inch pieces and are hinged to extend to 10 inches.. the wire must go through four different 90 deg ... more

done

KFT=6022 Foot Dimmer ?

How can I mend a KFT=6022 Foot Dimmer switch for my floor lamp?

done

Blue cable from secondary side of transformer(ktb-105)?

Hi again..... Your'e probably right about not describing the problem properly....you see The mains are connected in the 240 side of the transformer....the cables are connected on the secondary side t ... more

done

Blue cable from secondary side of transformer(ktb-105)?

You don't understand the question....there is no connection visible for the blue core...it looks that it could have snapped off from somewhere. is it possible that the blue could be put to earth to ma ... more

done

Blue secondary cable from transformer ktb-105 to light fitting?

Can anyone tell me where the secondary blue cable is connected from ktb-105 transformer. Can't find a connection on the light fitting.

done

pull cord snapped on light switch ?

Hi the pull cord on my light switch had snapped I have unscrewed the pulling mechanism box and everything sprung out does anyone have a picture to show me how to put it back together please Thank y ... more

done

light bulb replacement and a remote control?

I need to replace the bulbs in my fireplace and cant find out HOW , help . Also need a remote control

done

Fitting LED Bulbs?

I have a RING CT-65t transformer running 3off 12V 20W bulbs can I change these for LED bulbs?

done

hy-3360c?

Hi Paul Zella floor lamp no longer working. This has a Hytec HY-3360C board. Any suggestions re how to proceed? Can I purchase replacement, or fix the board? Any recommendations would be gratefully ... more

done

How can I fix my dimmer on my lamp?

How do I fix the dimmer on this lamp

done

25th avenue led 300 pack model 18012 ?

i have 3 of the above transformers that will not make connection to the christmas lights transformer is 3 pin female connect to lights when attached to lights nothing happens i will buy new ones from ... more

done

Buy hy 3360c?

We're can I buy in liverpool

done

How do I remove the rotating base of the Tizio lamp?

Need to replace fuse in Tizio table lamp, but do not know how to remove rotating disk/base. Help appreciated!

How can I fix a HY-3360C dimmer switch ?

I have a HY-3360C dimmer switch on a standard lamp that I suspect is faulty - the dimmable 300W light doesn't work, although the fixed 100W light does. Is it likely to be repairable, or do I need to b ... more

done