Have I got got a faulty programmer?

Have just replaced a Siemens RWB2E programmer which was a direct replacement which was giving trouble, plugged straight in and has been working for a week OK, now the clock has been stopping erratical ... more

done

Thorn Harcal 460?

Perhaps my 46 year old Thorn Harcal 460 is the last one in use, but its time is running out. The Danfoss RS 28 oil pump is leaking from the shaft area area and when I replace the 'O' rings, it only re ... more

done

How can i mend my baxi combi 105a?

Baxi Combi 105a overflow leaking pressure too high hot water only hot when heating on

done

Reset my worcester dt10rf programmer?

can i reset my worcester dt10rf programmer as after changing batteries none of the buttons work and it is locked. my boiler is now on even though i have set it to off. please help

done

Greenstar Highflow 440?

d5 code appeared, pressed spanner button till red then pressed ECO -- 11 appeared but still the pump does not come in - what ndoes this mean?

done

Morco gb 24?

my caravan boiler a morco gb 24 is showing a fault F2 and i am unable to get the boiler to light

done

F40 fault?

Boiler showing F40 on Ferroli optimax HE25S

done

Horseman channel plus XL - heating/ hot water issue?

My HORSMANN Channel Plus XL (heating upstairs on one channel & downstairs heating on another channel with hot water on another channel) - this programmer has three settings per day on a 7 day timer, ... more

BMU error code?

Valiant VTR 360. Has started switching off with the error code BMU on the thermostat. when I switch the boiler off but it starts working again when switched back on.

done

Power but not activating Baxi 105e boiler?

My brother lives away and he asked me to go round and turn on his Baxi 105e boiler. I've turned the power on and have a green light displayed the pressure is 1.5 bar. When selecting constant for heat ... more

done

Canon caress 2000 gas fire?

Canon caress 2000 pilot on but won't stay on when I turn the know to flame?

done

My central heating boiler not working?

I have a ravenheat boiler model CSI 85 AAAT Come condensing The hot water works fine but the central heating won’t come on after I change the times on the controller any ideas what’s wrong

Boiler problem?

why will my British gas 532/i not work on 12 degrees constant but works on anything else above that

done

DT20RF Programmer?

I have just come back from holiday and my DT20 RF programmer has 026 flashing on the screen

Myson Touch?

Myson Touch thermostatic controller. My mums new build has the Touch 2 upstairs which controls upstairs rads & hotwater. All good. Downstairs she has underfloor heating and ‘Touch’ thermostat. ... more

done

Valor petrus 850 electric fire?

Hi, I have a valor petrus 850 electric fire, and the flame effect has stopped working . All other aspects of the fire are working Please advise. Looking for agents in or near DE7

done

Replacement of elements?

how to replace heater elements in a enviwarm unit

done

I Ideal Isar HE24 Combi boiler?

i Ideal Isar HE24 How do I change the FLOW temperature on the boiler? I can’t find anything in the Manuel Thank you.

Myson 55 back boiler?

Myson 55 back boiler sparks but does not ignite

Remeha Avanta plus?

Hot water no problem but heating only runs 30 minutes then stops with E5 Error

done