how can fix my mcculloch 700?

Hi im 13 and trying to lern about motors I got a mcculloch 700 and i cannot get it to fire even once. I have checked for spark and fiddled aroud for hours. any help would be much appreciated

done

How do I get the coil spring back in?

I needed to replace the plastic sprocket on my Husqvarna 51, and now cannot get the coil spring back in. What' the secret?

done

Homelite Textron Chainsaw / 14" bar?

What should the spark plug gap be? What are the settings on the carb screws? When I start the saw it runs on high RPMs but dies on low and then is hard to restart. Sometimes I have to play around ... more

done

Chainsaw won't work when turned sideways?

Homelite XLS, Hard to start but finally warms up until turned sideways to cut a tree.

done

Fixing a broken crankshaft?

I have a mac cat 16" chainsaw that the chain stopped spinning under normal operation. I took it apart and noticed the crankshaft sheered off in the nut that holds the sprocket on. What can I do?

done

chainsaw will not start .......timeing screws off?

McCulloch 3516 not sure how to rectify problem as my saw will not restart.....had to replace sprocket, the revs were high on restarting....... but now will not start again......whats the problem?

done

WHY DON;T MY HOMELITE CHAINSAW ACCELLERATE?

I have a Homelite chainsaw 23 PowerStroke 2.3 cubic in. displacement 38cc and it idles fine but when I give it gas, it just stays at the same operating speed as idle. All the throttle links are hooke ... more

done

Poulan Mod. 2550 will not start. Approx 8 yr old. Occasional use?

The magneto produces a nice blue spark on a new plug when grounded to the outside of cylinder. The mag field coil has proper air gap and no sign of rubbing the flywheel magnet. The carb has ben prope ... more

done

oil line on homelite chainsaw ut 105154?

I have homelite textron chainsaw ut105154 need information on oil reservoir.one line goes to oil pump for oiling the chain but where does the other line go to

done

chainsaw dosent stay in idel?

my chainsaw dosent stay in idel when i started up it will run in Hi, as i let go off the treger it dies

done

How do I get the oil coming out of my chainsaw onto the chain, not casing?

How do I get the massive amount of oil that is coming out of the automatic bar and chain oiler (Craftsman 18" 40cc) onto the chain and not just the casing, logs and ground? Where and how does this rel ... more

done

How do I reattach the chain to a Homelite Textron chainsaw?

I was cutting a tree trunk and got the chainsaw lodged in the cut of the wood. When I got it freed up, the chain had pulled off the blade, but hadn't come out of the saw completely. How do I get the c ... more

done

How do I fix fuel leak in McChulloch chainsaw?

my chainsaw suddenly started to leak fuel from the carby, while its not running and just sitting on the ground. Does anyone know where i would look to find and fix this problem..

done

How do I put a Chainsaw brake back together?

How do I put a Husqvarna 136 chainsaw brake back together. The brake locked being bounced around in the back of a truck. I have it apart, but am not sure how the coiled spring in the handguard is su ... more

done

what fuel mixture does McChulloch power mac 310 takes?

I got a McCulloch power mac 310 someone gave me but I don't know the fuel mixture? Can you tell me please.

done

How do I fix my cahinsaw oiler?

How do I fix my cahinsaw oiler? It is a craftsman chainsaw model # 358.351062. It has a 16" bar, 2.2 cu. in. (36 cc) engine. How do I diagnois why the chain is not getting oiled? Does it have a pump o ... more

done

How do I replace the fuel lines on a chainsaw?

How do I replace the fuel lines on a chainsaw?

done

How do I remove a chainsaw clutch?

when trying to remove the clutch nut, the whole flywheel is turning. How do I stop the flywheel from turning or lock it so that I can get this nut loose. Any ideas would be very helpfull, thank you. K ... more

done

how do I test the coil, distributor and points on an engine?

I have an old international 6 cyl tractor motor on a wood chipper. It has no spark, and the distributor is turning. The cap, rotor, and points look good, no arc tracking on cap or burrs on points. C ... more

done

How do I fix my chainsaw pull string?

When I go to start my chainsaw, the starter chord always gets stuck fully extended. How do I fix it so that it retracts?

done