Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Mark Goodwin asked ... Mount field 725m ride on mower?    |    Joan Sorrentino asked ... Barcalounger issue?    |    David asked ... Not starting until I bang door closed?    |    Click here to ask your question

home Fix label Heating label_important Oil Filled Radiators category Glen

How can I fix my Glen "Rio" Oil Filled Radiator, Model 5123 or 5133?

My radiator is fitted with a non-resettable thermal safety cut-out, and I think this is the cause of the problem. How can I fix this without getting a service engineer?
Eric Edwards, December 2007
home Fix label Heating label_important Oil Filled Radiators category Glendone
You can buy thermal fuses from Maplin for round about £1. You should find the appropriate tremperature stamped on the original failed fuse. If you replace it, it should be crimped on or attached by screw connectors, NOT soldered on.

Tony Degnen, January 2008
link Click here to see other fixes for Glen 5123.

Fix Fault - Heating

home label Heating label_important Oil Filled Radiators

How can i fix my Dimplex Rio RMG 25 ?

Heating > Oil Filled Radiators > Dimplex

firebird enviromax combi c26kw?

Heating > Oil Filled Radiators > Firebird

Efficiency of my oil heater?

Heating > Oil Filled Radiators

Dimplex RMG25 causes circuit breaker to pop?

Heating > Oil Filled Radiators > Dimplex

Low pressure below 1, Lockout on. won't rest?

Heating > Oil Filled Radiators

Worcester heatslave 20/25?

Heating > Oil Filled Radiators > Worcester

vonhaur Dragan 2500w oil electric heater no power?

Heating > Oil Filled Radiators

Heater not heating and lights not coming on?

Heating > Oil Filled Radiators

Fix Fault - Heating

home label Heating label_important Oil Filled Radiators

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Regal K6745?
How can I fix my Scantronic 9448?
How can I fix my Peugeot 106?
How can I fix my Kenwood K30CSS10?
How can I fix my Scantronic 9800?