paul asked ... Hook timing Janome QC 6260?    |    David asked ... Beeper bust?    |    Tom asked ... Service manual for Lawnflite 908LA?    |    John asked ... Scantronics 9450 box stuck shut?    |    Pekaye asked ... Clutch Cable change?    |    Click here to ask your question

we have an F9 fault showing ?

when we go into the boiler and on advice try to up the water pressure, it just gushes out and will not go over 0.9 bar, an engineer has been out and said this boiler is prone to leaks that this happens all the time and that really its the circuit board that is the problem, as this is not my normal engineer I am a little worried, could this circuit cause an F9 fault?????
Joanne, November 2008
no nothing starts, when you switch it on the green light shows for a couple of seconds and then the red warning light shows and flashes F9

Joanne, November 2008
does the fan start

b, November 2008
which is what we thought, but the engineer says its a fault on the mother board. electricity is coming in to the circuit board but not powering the componants????

Joanne, November 2008
water pressure sensor fault

b, November 2008
sorry its a glowworm 30ci

Joanne, November 2008
you do not give make of boiler

jim, November 2008