I've cleaned the machine several times and everything seems to be OK

Patty B., December 2008

I had a similar problem with my steam buggy. To fix it i used a long thin piece of wire to clean out the jet nozzle, or try a long thin needle

Danny, January 2009

I have a scunci steamer....It also didn't spray...The problem is in the copper piston...the rod that is pressed when you push the button down. Just open the machine gently and hammer gently until the button goes in. spray with a little w-d 40 until button moves easily. You might have to use needle nose plyers to move it. It will work.

Diane, January 2009