John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Jo-Anne O'Mullane asked ... Clear E1 error code on smeg dishwasher with no water or leak?    |    MRG asked ... Trayford close coupled toilet?    |    Click here to ask your question

How can i fix my Simpson Delta 402?

On the wash cycle the agitator only goes in one direction instead of backwards and forwards. This results in all of the clothes being wrapped tightly around the agitator. Any help greatly appreciated
Martin Clay, December 2005
I have one of these machines, not reliably switching to and fro anymore . Off with the control head :
Some years back i had the capacitor replaced - the big round bit.
Today I've swapped the squared off bit with red white yellow black blue wires labelled ( out of sight) electronic forward reversing. Joy !
Probly both chunks need to be in good order.
This machine is pretty old now ....

Ian, January 2008
G'day folks,
I can do my washing again,
My agitator was only going in one direction, for a while, and then stopped altogether.
As I said above, the motor start capacitor lookes a bit suspect.
I replaced it, and all is well.
I could have bought a new motor $200,
I did buy a starting capacitor $20
the feeling of satisfaction, priceless.

Regards,
keith

keith robroy181@hotmail.com, August 2006
have u done anything to elimnate faulty components. i have a similar problem, as well as not spinning dry. both functions are driven by the same motor. i replaced the motor , still the same problem. If i spin the motot to help it to start it spin dries ok. the starting capacitor looks a bit sus, so I will replace that. the only thing left will be some sort of sealed unit, that controls the electronics. I'll up date this tomorrow regards keith.

keith Rowe robroy181@hotmail.com, August 2006
link Click here to see other fixes for Simpson.