Boiler ignites and burners come on with 10mbar burner pressure. However looking through the view glass I get flame lift off. I have changed the fan cleared the pilot assembly blown through the air pressure tubes and checked out the integrity of the flue. I still get flame lift off followed by the burners going out.This cycle then continues. Help
Previous post absolutely correct, potterton make a Renovation kit for the flue terminal which consists of a sleeve and new terminal, should take about ann hour to fit
www.elanar.co.uk, May 2009
Check the flue terminal , these flues had a tendency to rot around the inner flue at this point.
