I just got the Sharp XE-A203. Followed the instructions on how to turn it on, insert batteries and place paper... the roller even feeds the paper, but when I lock the print roller, I get an "H" in the display. The manual says H "Appears when the print roller arm is not locked"... the problem is.. it is locked!!! And it even feeds the paper... The machine does not let me do anything else!!! Any ideas please?? Thnx a ton!!

Jacob, July 2009

Hi Mark,
Thanks for your reply.
This is not an error, it's status info, and clear doesn't do anything.
What I did and worked, was to unplug the machine with the paper inside and then turn it on again after a while and it worked.

Jacob, July 2009

Hi Mark,
Thanks for your reply.
This is not an error, it's status info, and clear doesn't do anything.
What I did and worked, was to unplug the machine with the paper inside and then turn it on again after a while and it worked.

Jacob, July 2009

Hi.
Whenever you get an error on a Sharp, you must press CLEAR (CL) to remove the error.

Mark, July 2009