Tom asked ... Service manual for Lawnflite 908LA?    |    John asked ... Scantronics 9450 box stuck shut?    |    Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Click here to ask your question

leisure works 1611100 treadmil?

leisure works treadmill starts for split sec then err message. Motor will try to start approx. every 8 sec. if I move belt
Blaine, September 2009
the treadmill runs for about 14 mins then stops and restarts and runs for approx 2 mins. It continues in this sequence until it is shut off. what do you think is wrong?

Bruce, March 2013
Hi,
My treadmill is starting to smell like a burnt smell. It only starts after about 1/2 an hour. How do we repair this?

Stephanie, March 2013
It could be a couple things. first I'd check and make sure you have propper alignment of the rpm sensor and that it's actually functioning. There should be an LED on the lower board that should light up every time the magnet on the front roller passes by the sensor. If that's good it could be your motor brushes but make sure you unplug the unit before checking. They should have atleast 1/4" left and that would even be low. Those sound like the first possible causes as the lower board is trying to turn the motor so it doesn't sound like a board issue. I'm at fitfix&shaw.ca if you need more help.

Jamie, November 2009
link Click here to see other fixes for Leisure Works 1611100.