HT asked ... Radio code Philips 22RC200/35?    |    Roberta asked ... DW5080?    |    Dave asked ... Toilet Push Button not flushing properly?    |    Dave asked ... Repair kettle lid?    |    Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Click here to ask your question

How do you fix a jammed keyless chuck on a b&d drill?

I also have been struggling with a jammed keyless chuck on a b&d drill. However, the chuck is stuck in the closed position with a drive bit inside. So I can't get to the screw inside the chuck. What now?
Frank B., December 2009
I had a similar problem with my drill. While drilling, the drill jammed and snapped off the bit. this caused the chuck to tighten (more). I had to use two pipe wrenches to open the chuck. Hope this helps.

Rob, December 2009