We have an Elddis wisp 510 . Basicaly from each wheel arch round the front the sides have seperated from the floor. The floor bolts to the chassis in the front are ok and the ones from the axle to the rear have pull through slightly. It would appear that the batton at the bottom of the walls and the side of the floors have rotted away in some areas. what is the best way to replace thses battons and refix the floor to the chassis.

Regards
Andy Mayers

Andy Mayers, January 2010

If you've got to ask how to do it, it is plain that you are not qualified to do it. No disrespect intended.
I'd take the nut off the sunken screw, and if the wood is not too rotten, get a plate of metal and use this as a large washer, to spread the load. Making sure I'd treated the wood for any damage.
But if I were like you, and not too sure of myself, I'd take it to a repairer. especially if you intend to drag it down some motorway.
IF YOU INTEND TO TOW, GET IT CHECKED OUT!!

CHUMLEY, January 2010