1 hour ago Frank asked ... Working fine. No cold air?    |    4 hours ago c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    Click here to ask your question

how to disconnect alarm?

alarm keeps going off when power fails, minor problems with faults etc. in garage, when boiler cuts in.I would like to disconnect alarm until I can afford a new one.
m.pope, January 2010
Turn off the mains supply to the control unit Open control unit cover and remove leads from the standby battery
This will stop any inside noise but the outside sounder will ring for 20 minutes if the nicad battery is in the sounder is in good condition if it is flat the noise will stop straight away
After 20 minutes the alarm is completely dead

hansome Terry, January 2010
There are a couple of good emgineers on here offering good advice to the general public, but recently some of the questions mean that it is very difficult to help. M.Pope you need to help us a lot more, if you want good free advice.
Regards
Nick 07842 480037

Nick, January 2010
ok first of all what make is the panel then i can show you

but first does the battery work

let me know
Death

Death, January 2010