We have an Aquacycle 1400 ahd it has developed a fault.

When you close the door, select the cycle you want to use, press the start button and you here the "click" for the door locking, then it tries to lock again, and again and again. Withinn a few seconds, it bleeps 4 times and flashes the green light next to "end" - pauses for a few seconds and repeats the flashing and bleeping till you turn the cycle off.

Any clues?

Darren Moore, March 2010

the door lock light stays on an no other lights stays on an dose not work what could it be

kieran, November 2012

here is a clue to E40 fault.
The door lock is faulty.replace with a new one and retry.remove door gasket from the machine front ONLY and you can get to the door lock.held with the 2 screws you can see at the front.easy job to do

ck, March 2010