i have fitted a new stereo in my pug 106 and it works fine but only when the lights for the car are on. with the standard stereo when the car lights are on the stereo lights are on but it will work with out the lights on but the Sony CD player i put in wont unless the lights are on any help please
thanks

miles f lincoln, November 2004

when the wires are connected from the car to the head unit. on the head unit bunch of wires itself u should be left with a red wire hanging with a cap in it or on it, same goes for a yellow wire remove caps & connect, they should be like a male & female clips. hope this may help

big vin, December 2004

I've got exactly the same issue with my X reg 106. I gotta Sony MD head unit and i can't get the 106 to supply power to the memory when the ignition is off. There are 4 wires for power, and according to the Haynes manual they are:
B*** (white) = +ive
M*** (green + yellow) = earth
A*** (blue) = negative
V*** (orange) = lighting feed (the thin wire)
(where V*** is the wire number, if you can read it!)

It works fine with the ignition on, but where can i get a permanent feed for the memory from?

Steve, December 2004