home Fix label Kitchen Appliances label_important Toasters category Kenwood

How can I disassemble my Kenwood toaster?

My Kenwood Toaster is catching internally when the slide is depressed to activate it.I know I need a special tool to unscrew it but have no idea how to get hold of one. Any suggestions would be welcomed.
The model no. is YY950.

p.r.openshaw, December 2004

home Fix label Kitchen Appliances label_important Toasters category Kenwood

done

I've just sussed how to undo the 'special' screws on my Kenwood toaster. They have a domed top with six slots around the side.

I managed to undo them with a 4mm socket from my socket set and lots of downwards pressure.

Managed to fix the toaster too!

I Taylor, September 2007

I've just had a similar problem getting into a kenwood TT490. If the screws have cap shaped head with a 6 pointed star-shape then it is probably a system zero screw. Try RS online at http://rswww.com for a screwdriver. Size 1 fitted my screws which are about 5mm across.

jp, March 2005

I just used a flat blade screwdriver which would just fit into the screw. It worked!

Manzoor Ahmed, January 2005

go to a hard wear shop for this tool new tostermay be easier not dear

eamon, January 2005

link Click here to see other fixes for Kenwood.