Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

initial power up on r8 not working?

i have just installed a veritas 8 with remote keypad on initial power up when battery is connected the keypads zone 1 lights no set or unset light appears and system beeps 9 times the engineer codes do not work. appreciate some help?
down to earth elec, June 2011
Direct quote from Veritas manual >>

"Unit will not set and bleeps nine times.
The system has a tamper fault ................"

Believe it or not we know what we're talking about.

It's your fault finding abilities that are lacking.

acorn, June 2011
checked all zones and appears to be no faults

down to earth elec, June 2011
next time,buy a good panel,like scantronic,

gts, June 2011
start with zone one

gts, June 2011
you have a tamper fault,check your system

gts, June 2011
link Click here to see other fixes for Veritas 8.