Can any body help. I have scantronic 9800 alarm sytem fitted 20 years ago. Recently it started to play up. I have changed the battery only 1 month ago.
I set the alarm normaly it sets I have been told by neighbours that it goes off after 1/2 to 1 hour. When I come home the outside light is flashing inside the home there is no indication on the panel display. I set it off normaly with the code the outside light also goes off. Can someone tell me what the problem is and how can I fix it.

Tony Maan, October 2012

theres a surprise alarm guy !!!!!!

gts, October 2012

Bet we get the usual non response.

Alarm, October 2012

if cat or dog,sound of a bolt being cocked !!!

gts, October 2012

Best scanny panel to roll off the production line in my opinion,
the logs should say something and so will the rkp!!.

e manno, October 2012

If you have 9827 key pad it tells you on display "c" then which zone has been activated. Or press 5 to read log,

As Alarm has said, there's defo been a trigger because strobe running :)

Woof woof or meow? :)

e manno, October 2012

Logs, read the logs and tell us what they say.
There has to be an activation as the strobe is running.
New dog/cat?

Alarm, October 2012