Emma asked ... Foot pedal smoking?    |    Morne asked ... My defy dtl 125 toploader?    |    Ernie asked ... How to fix gearchange ldv maxus van 2006?    |    Cuckoo asked ... Changing batteries on a fixed bt corded phone?    |    Marc Nollid asked ... Nissan Micra mk 5 2018 rear seat mecanism?    |    Click here to ask your question

Fisher paykel mw059 won't turn on - how to fix?

It has been stopping in rinse n spin cycle but usually restarts after leaving for 5 mins n turning on again. Now won't turn on. Emptied water from pump n wall electric socket is working. Not sure what else to try. Pls help. Thanks!
Spitz, November 2012
You should have had it looked at when it was stopping before. That problem was probably the drain pump overheating and shutting off the power until the pump cooled down. If the power will not come back on now then either the drain pump has failed completely and fitting a new drain pump may fix it. However, there is a high possibility that the drain pump has now damaged the control board and if so that will also need to be replaced. Don't go buying both parts as you may not need both. Probably cheapest way is to get a service company out who will test and tell you which part you need.

Lincoln Appliance NZ, November 2012
link Click here to see other fixes for Fisher & Paykel MW059.