The motor was not rotating in the washing machine-no power supply? or broken motor(new brushes??)
Motor is removed and rotates freely/Model#AH7E19Eand BCME139
The motor inlet plug has 5 prongs.First two are red wire and I get 115 ohms between them with my tester.Two prongs on the other end (4th and 5th)have 4.8ohms and the 3rd and 4th 6.2. motor seems OK!!!
What else can cause the motor not to function?
No blockages and free wheeling drum.
Bosch nexxt 700 series
WFMC 6401UC/07/fd8706/900678 Type WAM1

J. knight, November 2012

you cannot test the motor the way you have just stated

mm, November 2012

have you checked across the motor brushes???and turned the armature as you tested the motor??its no use just looking at them,if you are certain the motor is ok,then you have a prob either in the timer,(very unusual)or the module that powers the motor,(very unusual too) check the motor again

mm, November 2012