Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

Transformer?

I have just fitted a new transformer but after a period of time the lights fade is there a reason why?
Mandy hill, February 2013
also check that there is no insolation covring the transformer as this will cause it to over heat its better to fit a transformer a bit over what you need,i.e if you fit 3 20 watt bulbs,that would norm be a 60 trans former,but i would reconmend a 150 watt transformer,becaue i have found lots of folk just go buy a buld and not ask for the wattage

mm, February 2013
Transformer rating (watts output) unsufficient for the wattage rating of the bulbs.
eg. If you have 3x20 watt halogen bulbs then the transformer should not be less than 60 watts

GB in Wales, February 2013