home Fix label Kitchen Appliances label_important Dishwashers category Electrolux

electrolux dx303 not heating?

I have followed some of the ideas, i've checked in line element (works) i have replace NTC therostat and check mother board and there is no burnt out or missing solder. but still no heating what can i do know. is there any other thing to check that could cause no heating.

Jacourt, February 2013

home Fix label Kitchen Appliances label_important Dishwashers category Electroluxdone

have resolder relay pins still not hot water is there any fuse for the heater or can the relay be no good and needs to be replaced

jacourt, February 2013

resistance is good usually around 29ohms so that is fine.Pressure switch is a switch so at certain levels the contacts will change from normally open to closed.you can test this with your meter and filling with water manually.would be good to test pcb output to see if that is outputting power to the element 1st.BE CAREFUL

CK, February 2013

the heating element resistance was 28. Should you get any resistance out of the pressure switch?

Jacourt, February 2013

bad solder joint on heater relay.Not always easy to see.resolder the relay pins.What was the heating elements resistance?.could be wiring and also could be pressure switch issue

CK, February 2013

link Click here to see other fixes for Electrolux DX303.