Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Click here to ask your question

washer leaking from bottom of door ???

got a whirlpool aquasteam 6th sense washer its leaking from bottom of door ??/
michelle, March 2017
If not the door seal damage "lip". Could be a blockup fabric conditioner compartment causing water to leak from the soap draw front then it trickles down the curvature of the door to 6o/clock position which gives the impression it the seal at fault when it isn`t

Andy, November 2022
Had something like this a while back. The door seal had been moved by something being dragged out of the machine, over the seal and it had pulled out a the bottom, from under the retaining spring.

Have a good look all round the seal where it is fixed to the machine and check it is seated properly.

Fortunately not too tricky to correct

acp, March 2017
Check around the glass for any build up of soap that will stop the seal from seating properly. If glass is all clean then check the rubber seal for splits or hole.

Lincoln Appliance NZ, March 2017
door seal needs replaced

gts, March 2017
link Click here to see other fixes for Whirlpool 6th Sense.