1 hour ago Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

how can I fix my craftsman 358.795571 trimmer?

it will run for 5to 10 seconds then dies then won't start again for about 2.5 hours then does the same thing
Rusty Rogers, April 2007
It sounds as though you have dirt or gunge in your carburettor.
You should disassemble the carb and soak it in clean gasoline / petrol. this will dissolve any leftover oil deposits from last season. Then blow through it to check there is no dirt inside either. Reassemble you r carb and it will let fuel through at the correct rate and not cut out in use. Drain your carb at the end of the season and it should work perfectly next time you need it.

James KP, September 2007
Didn't realize that there were 2 Allen head bolts that attach the head to the cylinder: Remove top cover (4 bolts under sticker on top + one in front), remove 2 bolts from carb, spark plug, lossen then retorque 2 bolts thru access holes in head. Problem solved, at least for me.

Bob, May 2007
Same problem: I took it completely apart, repaired fuel line in tank, new plug. wrapped wiring inside of cover (in case it was grounding out), blew air through carb ports, have positive fuel feed.
Had it 5 yrs. Only thing left is to try $25 ignition module or take it somewhere. Sorry no help.

Bob

Bob, May 2007
link Click here to see other fixes for Craftsman.