Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Lynnie asked ... BT Studio 4500 cordless telephone?    |    David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Click here to ask your question

how can I fix my hotpoint wmt01?

Some cycles work somedays then dont work other days. It sometimes doesnt rinse after a cycle and a couple of times it hasnt filled properly as i took clothes out and some were wet, some were dry. When a cycle actually starts, after about half an hour of fiddling with it to get it to start, the cycle only works for around 20 mins then stops but nothing is clean. The only cycle that seems to work is the boil wash. on this cycle it even does a fast spin. I dont understand how the wash and spin can work on one cycle but not the others.
donna, October 2007
My wmt01 washing machine fills then the drum turns round abot 2 or3 times then the whole machine jumps and the cycle finished light comes on, i cannot open the door as the machine is still full of water and the door locked light is still on ??? What can i do ?

ann brinsworth, June 2016
My wmt01 washing machine fills then the drum turns round abot 2 or3 times then the whole machine jumps and the cycle finished light comes on, i cannot open the door as the machine is still full of water and the door locked light is still on ??? What can i do ?

ann brinsworth, June 2016
fills up ok but not start wash cycle

dave, October 2010
Sounds like you are not getting any water through to the machine. check the taps that are connected to the water pipes and see if they are clogged up with grime this worked for my machine with the same problem.

Ben Allport, March 2008
link Click here to see other fixes for Hotpoint.