removal of jacking legs and ram on jcb 3cx 1986?

how do you remove the foot plate,leg and ram on a 3cx sitemaster jacking leg h reg 1986ish.ive taken the securing bolt out but the pin wont knock out?

done

my jcb 3CX 2003 model looses power and fails to push especial when the engi?

my jcb 3CX 2003 model looses power and fails to push especial when the engine. what could be the problem?

done

how can i fix my jcb214e it losing power?

would like to find out how to time my jcb 214e?

1987 JCB Syncro Shuttle trans Low Oil Pressure Light Stays On?

Cleaned screen; new filter and new fluids. Still the light will not go out. Removed pressure switch an checked continuity; seems "OK". Tractor works well in forward and reverse.

done

jcb telehandler?

i have a 2005 telehandler that i have just bought ,transported it to our yard and now it will only go into reverse gear even when you push the lever forward

loss of drive?

have jcb 3cx all elements work fine but have a problem with drive works ok with good power for about 10/15 min then complete loss of drive leave to cool and will work again for 10 min or so . not sur ... more

How can I fix my teleporter?

Jcb 525 58 teleporter oil cooled fan quit working what might be wrong?

jcb 3cx sitemaster ecu issue?

Hi all I bought a JCB 3CX Sitemaster 2007 with a Powertronic Shiftmaster gear from Greenshields JCB in Farnharm and exported it. I've had to change the ECU twice now at about £2.1k a go. Now it ... more

How can I fix a loss of power on my JCB JS 200 excavator?

I have a JCB JS 200 excavator that loses power after about 25 minutes of operation.

done

JCB 801mini digger?

how do I get to the starter motor to change it

JCB 215 Transmission problems?

The first and the third gear won't engage, on the valve i see 4 solenoid up and 3 down. did someone know wich one is for the first and wich is for the third ? My second, four and reverse work ! Tha ... more

tractors?

my 89 jcb 3cx stoped on level ground wont move forward or back changed and cleaned transmision filters and oil,dont think it is electric what can it be?

Jcb heater?

My 1988 jcb 3cx heater blower has stopped working it's been playing up for a while now switch ok and fuse ok but can't seem to find the location of the heater to check the connections, can any body h ... more

done

3cx jcb 1984?

Rear extension arm, hydrolic oil leek, when I press the foot peddle to extend the arm, it runs out down the bucket, loosing lots of H oil eachtime I reach out.

done

How can I find my fault on my JCB 3CX?

I have a JCB 3CX 1993 model, whether hot or cold sometimes it has power in forward and reverse and sometimes not, I have changed all clutches , transmission pump, piston seals, put new oil (castrol ag ... more

JCB DOSnt move forward?

I sutha,have JCB 2wd 86 MODEL it dos'nt move forward .please give me advise. also let me know how many clutch plate and how many pressure plate inside in the box if you have trasmission diagram can ... more

starting problem?

i have jcb 3cx 2002 model,when i try to start it's take only one round but did not start in secound try it's seems battery is dead,i put the new battery the result is same,when i put 24V battery it's ... more

done

What could be wrong with my 2001 jcb loadall?

When driving along in 1st or 2 nd gear the machine just stops dead if I put her in reverse she will move again

JCB 3CX Fuel System Problem?

I have cleaned the sediment bowl and changed the fuel filter on which I found a jelly like fuel mix gumming up the old filter. Having changed everything the fuel system won't prime in the normal way, ... more

done

89,jcb3cxwill only move when jacked up?

my jcb 3cx stalled on a uphill drive we left it cool and it drove on about 2 miles and stalled again now it only turns the wheels when its jacked up is it the gear box or maybe the torck converter?

done