I have code E showing on my Scantronic 9827 pad Can't activate alarm?

Scantronic 9827. Having changed the battery I tried to activate the alarm but pad display shows E. I have attempted to re set the system using the manufactures code without success. I had a similar p ... more

done

Scantronic 9500?

Hi. I have just purchased a premises with the above alarm panel. it is branded as a chubb alarm on the cover, basically the panel was off at the consumer unit and when I turn it on it seems to have ... more

done

scantronic 9200 - show area two issue?

HI, i am staying in someones house and they have given me the code to set the alarm - however when i have tried to do it it flashed up zone 2 and i don't know how to clear it, i tried to set with omit ... more

done

Scantronic 9651 aux dc fail?

I have just amended the programmed zones so that the kitchen sensor is not set when setting the system using B program. I managed to sort that out ok but when I went to test afterwards, the alarm ... more

done

Can I use a Scantronic 9448+ panel without door contacts ?

I have replaced my old security system panel with a new Scantronic 9448+ model.. Originally did not have Door contacts as the original installation only used PIRs.. Installing and programming the 9448 ... more

done

home alarm system?

i recently changed the battery on my scantronic 9449 and when i set the alarm the alarm activates. when i reset the alarm the zone 05 and 06 lights are lit. having read the install and program guide i ... more

Internal alarm constantly sounding? Scantronic 9827?

Hi, whilst decorating out hall i have knocked the control panel and the internal alarm is constantly sounding. I have tryed our code but nothing seems to b working. There is no code on the screen. Hel ... more

done

Error code ap aux power fail?

I have a Scantronic n9800 and have the following error code ap aux power fail. What is it and how do I clear it please?

done

I have a scantronic 9427 which has stopped emitting keypad sounds?

Please advise how to reset the Keypad to emit a beep sound when each key is pressed

Scantronic Ion-16, directional button on panel flashing red, why?

Any idea why the directional buttons on the control panel are flashing red? System won't arm since and cannot check audit log or reset.

done

sr fault code ?

Scantronic 9827 . Powered down and replaced battery , now have sr fault code . Will I need to reset NVM to defaults to clear this code?

done

Scantronic 9448+?

Upon setting alarm and leaving house all sounds fine but when re entering it activates the alarm instead of giving a count down to enter the code. Works fine when enter part activate to go upstairs an ... more

done

Detector fault code ?

Have removed s sensor that is not now required . Can not enter engineer mode , default code does not work . How can I clear fault code?. I have a user code,can I reset with this ? Keypad is scantro ... more

done

Scantronic 9200 alarm?

I have the scantronic 9200 alarm in my house, worked perfectly fine until today - usually it has a light on the alarm for day mode but now there is only a light on for power. Tried to get the alarm ba ... more

done

Scantronic 9427 doesn't do anything?

I've just moved into a house with a scantronic 9427 panel but the user guide that has been left says 9448+ and 9448ES. I was left a user code and engineer code but neither do anything. Nor does 1234 ... more

How can i get rid of BELL TAMPER message on home alarm?

Hi guys, this is my first time on a forum like this. Our home alarm is showing a BELL TAMPER message so I cannot set the alarm. It is also displaying the message to call installer. have a user guide ... more

done

Scantronic 9427 alarm?

Decorator disconnected the sencer. Since reconnecting keypad is showing tamper mode. How do I reset please. Also are smoke detectors connected to alarm? As they no longer work

How can I fix an EF fault (exit fault)?

Have tried pushing various keys to fix above fault but to no avail. The alarm now goes on when I am exiting hose with the usual beeping noise. Unfortunately it is not staying on as when I re-enter ... more

done

how to fix scantronic 9751 K01 Tamper reset?

hi guys, cant seem to reset my Scantronic 9751 system it keeps showing K01 Tamper reset no matter how many times i key in my code. the keypad was not tampered with or anything - the mains kept trippin ... more

done

9600 Scantronic?

Microprocessor intruder alarm system Unit tamper -- reset no. required

done