fan 4 humidex4?

My humidex 4 needs a replacement fan .Where can I get one.

ebac 2650e not collecting water?

running ok new filter no water

LG dehumidifier runs for 6 hours at 80% humidity.It only collect ?

glass full of water.I can hear the compressor kick on,and the display reads "on " I have pushed the red reset button,but still nothing.Any ideas where to start?

Kenmore dehumidifier runs but power light off and stuck in on position?

How can I fix or reset Kenmore Dehumidfier, power button will not light up, all other functions work well, but unit does get noisy after awhile

done

dont work nothing - help me?

Good morning everyone, I have a dehumidifier (equation) but it uses the deloghi electronic board DEM10 (COR597EV1.1 / D2514-840). the appliance was working fine, so far it does not do anything, it do ... more

fan motor?

The fan motor on my Hanari DH202 dehumidifier has stopped turning correctly, it fails to start when first switched on then after a short delay it start turning but in the wrong direction. If spun by h ... more

done

De'Longhi DEM10 Dehumidifier power cutting out now will not power on?

Hi can anyone help me diagnose what is most likely to be faulty with my De'Longhi DEM10, as it started turning off and on repeatedly so unplugged it and then plugged back in and it worked fine, but a ... more

Delonghi DEM 10 2011 - version pcb required?

Our Delonghi DEM 10 was bought in 2011 and has stopped working. On investigation the relay on the main circuit board has failed and rather than wait for a delivery from China we have decided to get a ... more

how to mend toshiba model RAD 50 DE dehumidifier?

how to mend toshiba dehumidifier rad 50 de also is a service manual to download

Di Longhi DEM 10 not working?

Hi Everyone, My DEM 10 dehumidifier stopped working a few months back - with no apparent power. This morning I checked the socket - OK, plug fuse OK. No lights on top of machine and fan & co ... more

DeLonghi DEM10 fan not spinning?

Crying in tears here, owned my lovely dehumidifier for about 7 years now, never any problems occurred!! However, my DEM110 is not collecting any water. Power is on, PCB works. I have opened the case a ... more

done

Black mini relays...3pin one side 1 pin other where do i get?

Hi, i am in the remote wildest country side in Shrops UK & cannot access city life....I explained the problem re the lower mini relay (burnt)..But i do need to put in a New one to find out whether thi ... more

done

DEM 10 where can i get Black mini-power relays?

Hi my DEM10 has just failed, i noted a chemical type burning smell...anyway turned it off took apart today. All after reading your members info re the troublesome Yellow capacitor & with particular re ... more

done

Exactly db90 not collect water?

Brought new used once for about 10 days then went into storage 6 yrs ago as new.want to sell so tested and all seams good left it in my bathroom water in Bath ect, no collection of water did notice ... more

Does changing 1uf capacitor fix abnormal defrost light behaviour?

I have had my Delonghi DEM10 for around 5 years. It has worked flawlessly until now. The Defrost light flashes in room temperatures greater than 20 degrees C. If I turn the unit off when the Defrost l ... more

done

what is the main reason of no power for the dnc65?

what is the cause of no power for the dnc65?why it is happen?

done

Why does my dehumidifier stop collecting water? ?

Why does my dehumidifier stop collecting water? It hasnt been used much and worked perfectly then just stopped taking in water. The sound is the same. It is a small portable one that takes about 1 lit ... more

done

Delonghi DEM10 EX2 not collecting water?

I have changed the relay 835L-1A-C, however problem not solved. Others are writing about changing the capacitor on DEM 10, however there are different capacitors on the DEM10 EX2-board. Has someone a ... more

How can I stop my ebac 2650e leaking?

My ebac 2650e is leaking water. Is there any way I can fix it

how do I mend my ebac dehumidifier ?

My ebac dhw 700 dehumidifier working but emptys on to the carpet help please

done