how can i fix my fender frontman 15 r amplifier ?

the problem is when the volume is turned up even by the smallest amount its like its at full volume with howling and feedback, and if i select the reverb i get a ticking sound, this does not seem to h ... more

done

Fixing my Semi Acoustic Guitar?

I have a semi acoustic guitar but the "semi" bit doesn't work. Its built like a basic hollow acoustic guitar and I'm pretty confused when it comes to pick ups. I mea where do they even go? Anyway, ... more

done

I want to convert my Strat to Tele pickups. Is it possible?

My Strat sounds like a Strat. I would love to get the Telecaster sound from it. The pickups are about $90. Do they make a conversion kit for the bridge pickup hole? Please advise.

done

problem with fender frontman 15g amplifier? ?

a while back i was playing on this amp at a low volume when it cut out. i took a look inside and found a blown fuse which i then relpaced with the correct fuse but still not working. the fuses do not ... more

done

peavy volume?

my volume on my peavy bandit 112 is stuck wide open even when you turn it down it is still loud. How do you repair that. Ive tried everything i know. It is only the clean side everything else works go ... more

done

Tuning pegs?

Two of the 6 tuning pegs on my daughters guitar are not working properly, not tightening the strings. Can this be fixed? If so where could I take it? Any advice appreciated.

done

how do i fix my bass amp?

i have a bx-50watt CRATE amp all of a sudden it just started to make a weird noise and i cant play my bass anymore any hints on how to fix it ?

Fender Pick-up sellection?

I'm in the process of building a Hendrix Tribute Strat i have an upside down tribute neck an i'm attatching it to a left handed body will the pick-ups work properly when attatched to the pick guard ?

done

Fender Strat wireing?

i'm in the process of wireing up a Left Handed Strat useing 1 250k volume pot along with 2 250k tone pots and a 0.1 uf Z5V capacitor along with a vintage tremolo, do i need to ground the scratch plate ... more

done

Buzzing Guitar String?

Need some help... I've just restrung my Tanglewood semi acoustic, which I have never had a problem with, & while all the string are fine & clear, the A string is nothing but a low buzz. I can g ... more

done

reverb not working fender twin 1978?

reverb not working on fender twin 1978 otherwise perfect

New Bass Amp has no sound?

So ok, I just got the Line 6 lowdown hd 750 bass amp. I have a GK goldline 8x10 cab 800ohms max. I am getting no sound out of the cab but I get sound when I hook up the D.I and go through P.A and when ... more

done

how to fix my stripped strap knob?

my knob that holds the strap on my bass is stripped and i use strap locks..how can i fix my bass?????

done

how to fix a nemesis by eden 200b bass amp?

my bass amp turns on for 4 seconds then the fuse(3.15 slow blow 250v) blows out, i bought the correct ones but it still keeps on doing that ...any help please...

Can I repair the bridge section?

The bridge section seems to lift at the rear end and it looks bad, how can I tighten it?

done

How can i fix my combo amp?

When i cut my Behringer gmx210 v-tone on nothing happen's for almost 10 seconds. Then the left speaker cuts on producing only a buzz/humming sound followed by the right speaker about to seconds later. ... more

How can I fix my ibanez guitar neck?

How do you repair stripped holes for a bolt-on neck?

done

AMP FAULT HUGHES AND KETTNER QC415 IF THE COOLING FAN IS BROKEN WILL IT BLO?

AS SOON AS I SWITCH MY HUGHES AND KETTNER QC415 ON IT BLOWS A FUSE IS THIS POSSIBLY THE COOLING FAN BROKEN?

done

problems with my volume and tone on my amp ?

i have a marshal valvestate 8200 bi chorus and in the last few mounths its been really quiet with a really crappy thin treble'y tone. Every now and again it will spring back into life and i can get th ... more

done

How can i fix my guitar?

How can you remove the back of an acoustic guitar, I need to reglue some ribs and reinforce the bridge. To do this I need to work on the bottom of the top

done