ACCENTA 8 MINI KEY PAD NOT WORKING?

AFTER A POWER CUT YESTERDAY THE RKP IS NOT RESPONDING TO ANY INPUT, THE LED'S ARE LIT BUT THAT IS IT. I'VE CHECKED FUSES, AND TRIED TO RESET THE NONE VOLATILE MEMORY BUT WITH NO SUCCES. THERE IS POWE ... more

done

outside bell not working?

Hi i replaced my accenta 6 alarm for the newer g3 compact alarm. everything works except the outside bell, which was working fine until the new alarm was fitted. any ideas would make me most grateful. ... more

done

Alarm cable near ac mains cable?

Hi All. I've very nearly finished installing a wired alarm system in my house and have now just read the instruction manual..... I know I know, what can I say, I was too keen, I'm a bloke etc etc... ... more

done

accenta 8 Mini Alarm?

I have the timer light flashing ( TA), how do I reset it to zero?

done

I can't fix my Napco MA-900 system?

I have a Napco ma-900 system that was working fine. I armed the system went to bed ,and in the morning could not disarm the system. I have three key pads and none of them could disarm the system. I ... more

done

accenta 8 mini. how do I turn off a zone??

I have a accenta 8 mini security system installed. I would like to know, how do I turn off a zone from the control panel?? Or does anyone one know the link to a copy of the instruction book.

done

alarm goes off by itself aprrox. same time every morning?

i replaced my battery ... i put my alarm on so that it will go off immediately if any door or window is opened during the night ... the problem is that it goes off by itself approximately the same tim ... more

done

How can I fix my accenta mini 8?

How can I fix my Accenta mini 8's constant red light under the tamper heading in the control panel. I am having building work done just now and although the alarm was not set this morning it went off ... more

done

I changed the batteries on my motion sensor?

I changed my batteries on my wireless motion detectorbut, the keypad still says check 12 which is refers to the motion detector.can i just disconnect the sensor permanently?how do i do it?

done

Accenta 8 mini after power outage,?

Keypad is lit up but cannot press any buttons, tamper, attack, day and power lights are all on solid. Any way to reset the alarm ?

done

Accenta G3 Alarm?

After removing a sensor for decorating purposes, my alarm will now not work. The system went into tamper alarm as expected when i removed the sensor, but after refitting, none of the sensors show red ... more

done

how can i fix my house alarm?

hi,i have got a newland alarm the problem i have is the power got turned off in the house when it got put back on the control panel is no longer lit the sensors are working ,what i did notice when the ... more

done

How can I fix my Scantronic alarm?

A few weeks back I went away for two days and when I returned I entered the house to find that the alarm did not register. When I looked at the main control panel the tamper light was flashing. I tr ... more

done

My security alarm box is dead. It ha an FC on the touch pad?

I have only had this brand new home security alarm box since Jan 05, it stopped working. A tech came out and told me that it was dead but he didn't know why. This hasn't even been in a year. I ne ... more

done

SCANTRONIC ALARM BATTERY?

JOHN THE ALARM ENGINEER IF YOU ARE READING THIS. I've been told the fault on my Scantronic [on this listing of questions], that my alarm battery needs replacing. I checked it and it only reads 6.8v a ... more

done

Scantronic Alarm system?

I moved into my bungalow April 04 and it has a Scantronic 9452 house alarm fitted by Pheonix alarm systems and it was connected to the telephone line and the installers/control centre collected their ... more

done

sensor in my conservatory keeps false alarming?

we have a dual tech sensor in our conservatory which likes to false alarm in the middle of the night ,has anybody else had this problem and how was it cured.The sensor is a Mirage dual technology micr ... more

done

My alarm system has died on me!!!?

How do I fix my optima alarm system? My husband turned off the electrical power yesterday whilst doing a job, when he turned it back on the alarm wouldn't work. The power light is on red, the day li ... more

done

How can I fix my home alarm system?

During a recent power cut my alarm system activated. I could'nt get it to turn off then I noticed the power on light on the keypad was not lit up. The pad would not operate and I dont seem to be able ... more

done

How can I bring my alarm back to life ?

I have an Optima house alarm.The Tamper,Power and Day lights are on and the attack light is off.None of the zone lights,1 to 6,are on.The problem is it wont operate.No buttons beep.Cant turn alarm on ... more

done