Replace Charge brush Handicare 950?

Handicare 950. Where is the charge brush located and how do I get to it? Paul.

model 420 not working?

I have the Stannah 420 and it does not work with either the toggle or remote. I took the cover off and reset it by the switch and green power led came on then when I put the toggle on the #1 red led ... more

Stannah Stairlift 260 doesn't stop at bottom charging point?

My partner's father's Stair lift works perfectly when going to up position. i.e. copper plunger hits slow down flag. Stannah lift slows down and stops as it should with the plunger on the copper recha ... more

260 stair lift?

Hi 260 stannah stair lift we changed the battery now the green light is on there is a click as if it is going to work but nothing happens

How do I connect the replacement brushes in my minivator 950 stairlifthi?

Hi I’m replacing the brushes in my minivator 950 stairlift but I’m having great difficulty attaching the coil part to the nut- is there a way of compressing the spring? Any help appreciated Tha ... more

shannah chair lift 260?

on the circuit board led light stays on and chair wont move

Stannahs 420 chair lift?

chair beeps in the lower stop position. If I shake the chair it will stop.

minivator 950. seral 502150455. 2015 year . ?

i disconnected a 3 core back cable which goes on to on off switch & reader display i can not find were it goes back on the pcb board can yu help me with this thanks roy

Why is my lift making baning noise on curve on way up?

Model 260 stair lift very slow makes hanging noise in way up bangs extra loud on curve joint going up

Footrest is not working?

The whole chair is working except the footrest?

My stannah 420 ?

My stannah 420 goes to the top but will not come back down

Stairlift Stannah300?

When is humid stairlift not working I have to use hairdryer in aria where is main electronic pcp board then it works till next time. Need advice how to fix.

Stannah 420 Lift start/stops stuck at top?

Hi, We have a stannah 420 which is now stuck at the top of the stairs. It goes to start as normal but stops instantly as if there may be an obstruction. No obstruction that we can see. This happened a ... more

Stairlift up problem?

The stairlift will go down ok but will not go up?

can you please tell me if i need to switch off the stair lift off after eac?

can you pleasetell me if i need to switch OFF the stair lift after each use,and also how does the battery get charged.please reply soon. thanks khan

done

handicare simplicity stairlift 950 model 2015?

Ihave just put a new ciruit board in and now all Iget is code 9 and remotes will not work

where is the winding handle housed when not in use on a stannah stair lift?

Where is the winding handle housed when not in use on a stannah stair lift? It has fallen out and I found it on the stairs but I don't know where it lives.

done

stanna 420 stairlift brush/brushes?

I would be greatly interested in the access of the brushes also as mine are acting up too. Now it seems to be mounted directly at the bottom of the chair assembly from what I can tell, but am unable t ... more

Non-working Minivator 1000?

My minivator 1000 was just reinstalled in my new condo. After fixing a few problems that were quite obvious and replacing the batteries, power up shows the - in the diag window but it doesn't move. lo ... more

done

420stannah stair lift goes up a few feet &stops?

420 stannah stair lift will go a few ft.&stop,turn off power switch &turn on will go a few more ft. chair will come down no problem

done