How can I fix my Creda Concept Solarplus 48339 Cooker ?

Does anyone know how to gain access to fit the light tube in the front control panel ? Ive tried but do not want to force any panels that Im not sure about.


done

How do I fix my Zanussi top oven/grill?

The top oven on my Zanussi ZCE 7701 electric cooker has stopped working. It doubles as a grill and the grill won't work either. Everything else on the cooker is working.


done

how do I put my moffat epicure 2000 oven door back on?

I took the door off to clean it and now I can only get it back on so that it will close, but it sits too low and rubs against the top of the drawer, and it doesn't close all the way -not allowing for ... more


done

electrical circuit for hob?

We have just had a new kitchen extension built and I am not sure it electrics have been correctly installed, should the hob run on the same circuit as the sockets. I know the cooker has its own circui ... more


done

How do i change the element in an Ariston FV271 GB fan oven?

I have an Ariston FV271GB cooker. How do i gain access to the element so i replace it. Everything seems to work except there is no heat. Where is the element? I thought it would be at the bottom bu ... more


done

how can i fix my fan oven?

i find that when i switch my electra oven on it does not heat up


done

how do I replace the element on my Hygena Electric Oven?

I have a replacement element but I've not been able to get the old one out. Is it just a case of unscrewing it and giving it a good yank. Or are there bolts that require removing from the other side?


done

how do replace fan in creda europa built in oven?

i need to replace the fan in a creda built in oven model number e420e


done

setting time?

creda concept topline cooker, how to set actual time on clock


done

Belling Electric Oven - over-heating?

The main oven on by Belling dual oven elec cooker appears to cook at max temperature only - all food is burned. Is it the thermostat? Its a bit pricey to change if that is not the problem!


done

How can I fix my Russell Hobbs cooker?

How can I fix my Russell Hobbs cooker? I have a 2 hobs cooker. My Russell Hobbs cooker is not working now,may be due to an electrical problem but I really don't know the reason why.On chrismas, while ... more


done

How can I fix my electrolux fan oven?

While cooking dinner the oven just went off. The fan works but the light does not come on neither does it heat up


done

How do I remove the door on a Zanussi ZDA55 oven?

The main oven door on my Zanussi ZDA55 built-in oven has become wobbly on the right hand hinge. Does anybody know how to remove this door so that I can check to see if it can be fixed?


done

the glass in the door of our ZANUSSI oven?

The inner pane of glass in the door of our ZANUSSI oven, model # ZDM 869X has come away in one corner. It is held in position with a bead of sealant. Is there a high-temperature sealant suitable to ... more


done

Creda Carefree 600 rear Right Plate only operates at full on and off?

our Creda carefree 600 electric cookers rear right plate only operates at full on and full off, do i need a new control unit or what?


done

Creda Oven (48197) How do you Replace the Control Panel Bulb?

I have a Creda Bulit in Double Oven Model (48197). The lighting for the control panel has gone so I assume that the bulb has blown. Creda have sent me a replacement bulb which looks more like the ac ... more


done

grill?

the grill on my C reda Cooker is not working


done

Westinghouse schematic or repair instructions?

Where can I find a schematic diagram for my Westinghouse electric oven or instructions on replacing cycling relay on the oven. Thermostat seems to be working, no current at the element connections ... more


done

Resetting Creda Concept Clock ???

How do you reset the clock ( LED display ) which flashes 00.00 after a power failure ??? Model number unknown


done

hown can I fix the inner glass on a Tricity Bendix cooker?

The inner glass on the Tricity Bendix cooker came out when being cleaned.It just lays flat on the inner door surface,what can be used to keep it in place?


done