needles?

I was changing the needles on my brother lock 929D . For some reason I cant seem to get the new needles to go up and lock in. when I turn the screw the needle do not hold. What am i doing wrong?

done

How do you thread a singer 513?

When I try to sew with my singer 513, the top thread will break and I will have a bunch of knotted thread on the under portion of my fabric. The bobbin thread from underneath does not even catch. I ... more

done

Singer sewing machine smoke came from foot pedal?

Was changing the thread when my Singer sewing machine started going very fast on its own and smoke came from the foot pedal. What is wrong and can it be fixed?

done

How do I thread the bobbin on a singer 626?

I have had this machine for around 25 years and never had a manual. I obviously haven't used it for a long time because I can't remember how to thread a bobbin. I seem to remember that it is done t ... more

done

Material will not feed in Singer 513?

My SInger 513 works great except suddenly the feed stopped working. Any ideas?

done

Singer 626 machine needs bobbin tension adjustment?

How do I adjust the tension in the bobbin for my Singer 626 (purchased in 1966)? I know how and where to adjust the top thread tension but not the bobbin thread. Its not in the manual.

done

singer timeing?

singer sewing machine 2404 does not pick up bobbin thread

done

How do you wind the bobbin on the singer 626 model?

I just got a machine free, and no instructions, and need to know how to wind the bobbin

done

where can I get an instruction manual for my Omega 2000?

where on line or in store can I get an instruction manual for my Omega 2000. I live in Vancouver, B.C. Canada. What would be the cost? Are there any free downloads?

done

foot pedal to singer sewing machine?

Wiring info please for footpedal to singer sewing machine connector. Seems to be four wires... 2 yellow, one black , one red, but only three connectors... which wires go to which please

done

Where can I get a manual for my singer111W155?

The timing is off and the tension is off. Where can I get a manual so my husband can learn to fix my industrial singer 111W155? I've had no luck at the singer web site and there is no one in my area ... more

done

How can I replace the take-up lever on my 211g165?

Take-up lever on my 211g165 broke (machine was droped by shipper) Need to know how to replace it. Do not want to take machine apart more than nessesary.

done

How do I time a Singer stylist 513 after putting on a new gear?

The gear I replaced is a verteral shaft toward the front of the machine. The needle bottoms out, and will not finish it's cycle. Thanks, to all who reply

done

How do I rewire my old Singer 15J foot pedal ?

I have a vintage 1948-50 Singer electric sewing machine, model 15J. A wire on the foot pedal came loose -- and now I cannot get it back together!

done

my sewing is leaving no stitch only holes?

I have a singer 5050 sewing machine I thread it and place the bob in and everything .It took a bit to get the bob to take the thread up the hole.But now its not sewing but only the first stitch.Help p ... more

done

I think my machine's timing is out?

I have a New Home/ Janome model 346. the stitching on my machine is very uneven. Some stitches are long and some are short, I think it may be the timing but don't know for sure.

done

How to make my sewing machine work right?

My sewing machine is not working right, the motor still works, but it is very tight and the needle is not moving unless I turn the dial manually. Help

done

how do I set the timeing on my singer sewing machine model 211G165?

How do I set the timeing on my singer sewing machine model 211G165. I was sewing through a thick layer of material and bent the neele. I replaced the needle and now it will not pick up the bobbin thre ... more

done

my needle stoped working and cloth is cught?

i was sewing when my needle stoped working but icant get the cloth out

done

how do i fix a lose bobbin in my sewing machine?

How do i fix a lose bobbin in my Kenmore sewing machine model 17126690?

done