49 mins ago Sandy asked ... Replace vertical gear on Singer Fashion Mate 252?    |    Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Click here to ask your question

my phone crackles?

just fitted phone socket in bedroom and put outside cable to bt socket, wired as per wiring diagram,phones hiss while talking any suggestions also bt broadband
phil, November 2009
BROADBAND PROBLEMS...!

www.atelcom.co.uk

All telephone / broadband problems resolved.

Atelcom, March 2010
Perhaps I'm out of sell by date but always thought that terms 2, 3 & 5 were used for extensions.

As for the 6 wire, as long as the same colour wire is in same terminal of each extension.

For ease of I.D use three main colours throughout as follows
term 2 Blue/white
Term 3 Green/white
term 5 Orange/white
This eliminates 'Did I fit Blue/white to 2 or 5? You know with above 2 throughout is blue/white 3 Green/white and 5 Orange/white.
T is right you need an ADSL for each socket using a comunication instrument.

BB, November 2009
Contrary to some wiring diagrams, ONLY the following wires should be connected between the Master Socket & Extension socket: Blue & White to Connector 2 and White & Blue to Connector 5. NO OTHER wires should be connected. They are not needed/used an can cause problems.

Second ALL socket that are in use MUST have an ADSL microfilter.

BTW: "outside cable to to bt socket" I hope that you do not mean that. The Extension MUST be connected to the back of th faceplate of the BT Master Socket.

T, November 2009