Blaablaa asked ... How can I fix?    |    pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Click here to ask your question

Baxi Bermuda boiler pilot lights up when I switch the water or heating on i?

when I switch on the hot water or the central heating the systems shut down in a few secounds thermcouple has been changed but still the same can anybody help please
Richard Jones, November 2004
could be airlock in the boiler try to drain some water off from the boiler there should be a drain outlet for your heating let this run to let the air out as the system fills.

les, November 2010
If you press the grey knob for lighting the pilot light,it should go in quite a bit when pressed. If not try turning it clockwise and anti-clock a couple of times then leave it for up to 3mins. In the 3mins the pilot unit should reset (with a click noise). Then try lighting again, if it still won't light it sounds like the pilot unit is faultly. Never changed one so I don't know whats involved (sorry). Hope this helps. John.

John martin, April 2008
sounds like o/h stat open circuit- BEWARE not really a diy chore

christopher wild, November 2004
link Click here to see other fixes for Baxi Bermuda.