I need to replace the clutch on a Stihl 025Z chainsaw. I need help from start to finish.

John McCoy, July 2007

How do I obtain an assembly manual for my carburator

danny, February 2009

remove the chain cover, then remove the bar and chain, you are then left with the clutch drum remove drum whichsome times is held on with a circlip, once the drum is removed you have the clutch, but becareful the clutch is a left hand thread and do not use a air tool to undo it the crank snaps easily.!!

john, July 2007

Take off bar and chain
Remove spark plug
Push some starter cord down spark plug hole
Rotate engine by hand until the piston tightens up against the starter cord
Select the correct size socket and undo clockwise.
Reverse to fit new clutch

You may need to locate the oil pump drive pin on the clutch drum notch on reassembly

Hope it helps

Phil UK, July 2007