Carver Cascade Rapide?

my carver cascade rapid seem to fill with water but water will only flow from the cold tap not the hot tap can you help thanks Clive

pressure relief valve-carver cascade rapide?

my pressure relief valve has snapped just before the threaded end, any ideas on how to get threaded bit out (very tight) without damaging anything else or doing a total strip down of heater

whats wrong with it?

my carver 2 water heater is not heating the water up the gas burner is lighting and getting hot but the water is not

done

Carver water heater?

Hi sorry I'm knew to this.. We have a swift corvette caravan ,at the beginning of our holiday the water heater was working ok then ,we realised it wasn't turning off !! I realised there was a dripp ... more

carver water heater?

the ignition wont stop sparking when heater is lit

done

how to switch on the gas burner on my carver cascade water heater?

How do I switch on my heater to use gas. .

done

carver water heater problem ?

when switched on green light is on but water does not get hot everything works ok on electric

done

Powering a Carver Cascade 2 Water Heater?

Hi, The leisure battery in my camper van has packed up, Is there an alternative way of powering my Carver water heater like a mains to 12volt Inverta or this that i spotted on Ebay (Fusion 200watt 12v ... more

done

carver cascade 2?

I have an Elddis Vogue 1V which has the Carver Cascade 2 hot water/heater system. When I switch on I get the green light, then after a few seconds I get a pop/backfire sound and the red light comes on ... more

how do you change seals on carver cascade 2 water heater?

how do you change seals on a carver cascade 2 water heater

Carver 2 water heater fast drain valve?

Fast drain valve plastic has broken off in the thread. Anyone know easiest way to remove it. Also anyone know what size the thread is in case I need to tap the thread again when removed. Thanks in ad ... more

done

how to remove screws from inspection plate that are rusted solid?

hi I am trying to remove the plate in front of the gas burner on my carver water heater but the left hand screw is rusted solid and I do not want to break it off. Can I have any helpful suggestions a ... more

done

how can I re-connect the wires in the control box of my carver rapide ge?

the wires in the control box on my carver rapide ge need to be re-connected can any one help with advice as to where each wire is connected. many thanks

done

I am seeking help regarding a wiring diagram for a carver Rapide GE ?

due to frost damage I had to replace the bar that secures my Carver Rapide GE water heater. The plastic box which fits to the water heater has loose coloured wires. I would very much appreciate advice ... more

done

carver cascade water heater fuse?

I have a mk 2 carver cascade water heater and I am looking for the 5 amp fuse for it. It states in the manual I have that there is one but not where it is I have had the control panel off and it is n ... more

done