Hard to start?

Qualcast SLK26B Petrol Hedge Trimmer is the make and model

Qualcast hedgemaster?

Replaced belt on Qualcast hedgetrimmer but it slips and rubs on housing. Any. Ideas?

How can i mend my qualcast hedge trimmer GHT600A1?

the blades on my electric qualcast hedge trimmer GHT 600A1 have stopped working although the motor is running.

done

How can I mend my Qualcast hedge trimmer?

How do I put my Qualcast hedge trimmer back together

done

Blades not cutting all of a sudden?

my blades are not cutting the hedge. It was ok at the start then just stopped. the blades are still moving like normal. QHTE600 Qualcast 55cm 600w Electric Pivot Hedge Trimmer.

How can I get button to pop out again?

Qualcast 600W electric hedge trimmer GHT600a1. The button which allows it to swivel is stuck inside. So it does not get fixed in a single position.

Qualcast 380 hedgetrimmer?

This question from 2017 has no obvious answer but it happened to me this morning Replaced drive belt on qualcast 380 hedge trimmer but it keeps slipping off and cutting into housing.

How can I mend my Qualcast ght600a1 electric hedge trimmer?

My Qualcast ght600a1 600W electric Hedge Trimmer motor runs but the blades dont move. I've made sure they arent jammed. is there a clutch mechanism that is slipping and can I fix it myself, and how?

Hedge trimmer not working?

I have a qualcast cordless 18v pole hedge trimmer, MOE-16ET 410. Battery fully charged but there is no power to the trimmer.

done

Hedge trimmer extending pole does not lock?

My qualcast 18v cordless pole hedge trimmer will not lock the extending handle into place unless it sits the wrong way up. It’s impossible to use it with the handle upside down or right way up wit ... more

Hedge trimmer not cutting above 5mm?

My Qualcast hedge trimmer vibrates badly when I try to cut anything over 5mm diameter and won't go through it.

hedge trimmer?

When cutting with my Qualcast trimmer the blade keeps going right angle, is there any way to tighten this to stop it going, only when I want to turn it manually?

How can I replace the cable on my Qualcast hedge trimmer?

How can I replace the cord on my 600W Qualcast hedge trimmer as I have accidentally sheared through this last week. Is this expensive and should I cut my losses and invest in a new trimmer? Perhaps ... more

done

Does the gear section need grease or lubricating?

I have a Qualcast HTEG 55A corded hedge trimmer, , the blades spin, but do not cut the hedge. I have removed the plastic cover at the base of the handle- cleaned out the grease and leaves etc. What ... more

done

Qualcast 380 Hedge trimmer drive belt?

Replaced drive belt on Qualcast 380 hedge trimmer but it keeps slipping off and cutting into housing

Replaced drive belt ?

Replaced drive belt on qualcast 380 hedge trimmer but it keeps slipping off and cutting into housing

done

how can i repair my pullstart please?

hi i have a qualcast petrol hedgetrimmer slk26a and the pull start assembly was broken and an attempt at repair by previous owner has left it with no springs attached but i do have them.please advis ... more

done

How do I get the casing off my hedge trimmer?

My hedge trimmer is a qualcast GHT600A1. I carelessly cut through the cord recently. To attach a new cord I need to remove the green casing where the handle is. I have removed all five retaining screw ... more

Need help to re-assemble qualcast hedgemaster?

I have replaced the cable now need to re-assemble and have a spring which has come out also a wire bracket and don't know where they go. It is a model FL016L8091;